Bel-Ray Molylube Extreme Pressure High Viscosity Grease Solves a Costly Bearing Problem

A large quarry operation in Trinidad has four facilities that utilize shakers with large double spherical bearings. The company was using LE Almagard 3752 greasein a pneumatic lubrication system. The grease was a lithium complex NLGI 2 grade with a base oil viscosity of 144 cSt @ 40°C and 11.7 cSt@ 100°C. The NLGI 2 grease would not slump into the suction tube of the grease pump and the bearings were not getting greased sufficiently. The bearings were not lasting very long even when they were getting grease due to the low base oil viscosity.

“American-Made” design embodies pride and commitment to over 60 years of manufacturing in the USA